Seal Ring - Front Crankshaft, Replace
Remove, Disconnect
Remove toothed belt - see operation "Toothed Belt, Remove and Install".
Remove toothed belt drive gear - counterhold with KM-662-C (1).
Edge out seal ring (2) from oil pump with suitable tool - ensure that sealing surfaces are not damaged.
Install, Connect
Lightly coat sealing lip of the new seal ring with silicon grease (white). Press seal ring into oil pump with KM-693-A (1) - use fastening bolt and washer of toothed belt drive gear. Attach toothed belt drive gear with new fastening bolt to crankshaft -counterhold with KM-662-C (2) - tightening torque 250 Nm /184 Ibf. ft. +45°+ 15°.Install toothed belt - see operation "Toothed Belt, Remove and Install".
